User login

Your shopping cart is empty.

Group NF22 - Two 12 Volt - 55 Amp Hour Elite Batteries

BCI Group NF22 Batteries, sold in a pack of two with a 1 Year Warranty.

Group NF22 Batteries are compatible with Jazzy Scooters, Pride Mobility Chairs and Electric Wheelchairs.

These Batteries Fit 12 & 24 Volt DC Applications.

Price: 
$310.64
SKU:
58-GPS-55-NF22

Please Note: This battery comes with New and Improved Terminals. The terminals are no longer posts, they are internally threaded, as pictured, and operate the same way.

Specifications

Voltage Amp/H Length Width Height Weight
12 Volts 55 AH 9.02" 5.43" 7.87" 76.2 lb

Specifications

Battery Type
12Volt, 55 Amp Hour
Capacity
225.1Watts/cell 15min rate(1.67V/cell)
55.0AH 20HR(1.8V/cell)
Dimensions
Length 229mm (9.02 inches)
Width 138mm (5.43 inches)
Height 200mm (7.87 inches)
Total Height 203mm (7.99 inches)
Approx Weight
76.2Lbs.(34.6kg)
Self Discharge  
Current
Maximum Discharge Current for 5 seconds: 550A
Initial Charging Current <8.04A
Operating Temp
Range
Charge 0°c(32°f) to 40°c (104°f)
Discharge -15°c(5°f) to 50°c (122°f)
Storage -15°c(5°f) to 40°c (104°f)
Internal Resistance
Aprrox 8 mΩ (25°C)
Container Material
ABS
Terminal
T6

 

Product Specifications Sheet

ELITE 12 Volt 55 Amp Hour Spec Sheet

Features

  • 1 Year Warranty on Wheelchairs where batteries are continuously deep discharged between charges.
  • Lead alloy with low calcium minimizes gassing and extends life of grid.
  • Through unique active material recipes, plates after undergoing curing and tank formation provide outstanding energy density and ensure the quality of the battery.
  • Using brass coated lead alloy battery terminals minimizes impedance of connecting cells inside.
  • Case made of ABS resin and cells kept under internal pressure protects from outer shock or impact.
  • Micro-porous AGM separator completely absorbs and retains electrolyte under the pressured cell design.
  • Electrolyte sufficiently serves for electrochemical reactions in battery but never spills.
  • Battery cases are sealed in epoxy and cells are covered with vents to avoid cell contamination with the atmosphere and serve for internal oxygen reaction.
  • With very little gas evolution, the water loss is minimized and service life is extended. Excess pressure and gas will be released which ensures safety.
  • Vent design is certificated by UL