User login

Your shopping cart is empty.

Group 24 - Two 12 Volt - 80 Amp Hour Elite Batteries

BCI Group 24 Batteries, sold in a pack of two with a 1 Year Warranty.

Group 24 Batteries are compatible with Jazzy Scooters, Pride Mobility Chairs and Electric Wheelchairs.

These Batteries Fit 12 & 24 Volt DC Applications.


Please Note: This battery comes with New and Improved Terminals. The terminals are no longer posts, they are internally threaded, as pictured, and operate the same way.



Voltage Amp/H Length Width Height Weight
12 Volts 80 AH 10.2" 6.61" 8.43" 110 lb


Battery Type
302.5Watts/cell 15min rate(1.67V/cell)
82.0AH 20HR(1.8V/cell)
Length 259mm (10.2 inches)
Width 168mm (6.61 inches)
Height 208mm (8.19 inches)
Total Height 214mm (8.43 inches)
Approx Weight
Self Discharge  
Maximum Discharge Current for 5 seconds: 800A
Initial Charging Current <24A
Operating Temp
Charge 0°c(32°f) to 40°c (104°f)
Discharge -15°c(5°f) to 50°c (122°f)
Storage -15°c(5°f) to 40°c (104°f)
Internal Resistance
(1KHz) 6.6 mΩ
Container Material

Product Specifications Sheet

ELITE 12 Volt 80 Amp Hour Spec Sheet


  • 1 Year Warranty on Wheelchairs where batteries are continuously deep discharged between charges.
  • Lead alloy with low calcium minimizes gassing and extends life of grid.
  • Through unique active material recipes, plates after undergoing curing and tank formation provide outstanding energy density and ensure the quality of the battery.
  • Using brass coated lead alloy battery terminals minimizes impedance of connecting cells inside.
  • Case made of ABS resin and cells kept under internal pressure protects from outer shock or impact.
  • Micro-porous AGM separator completely absorbs and retains electrolyte under the pressured cell design.
  • Electrolyte sufficiently serves for electrochemical reactions in battery but never spills.
  • Battery cases are sealed in epoxy and cells are covered with vents to avoid cell contamination with the atmosphere and serve for internal oxygen reaction.
  • With very little gas evolution, the water loss is minimized and service life is extended. Excess pressure and gas will be released which ensures safety.
  • Vent design is certificated by UL.