Provides networked systems with benefits beyond those of traditional power conditioning products. Patented Powevar filter elements in the safety ground circuit prevent the formation of "ground loops."

Whether noise is generated on the line of by the load, this equipment's low-impedance transformer and bi-directional noise filter protects your system from all the problems caused by power disturbances, from lost data to "no problem found" service calls and more.

Suitable for small or mid-range computer systems, multiple network servers, large phone or voice mail systems, and other critical equipment using 120, 208, or 240 VAC loads up to 62 amps.

Each conditioner combines a surge diverter, isolation transformer and power line filter, to effectively filter out the whole range of power quality variations.

Suitable for programmed logic controllers (PLCs), computers, CNC systems, robotics, data acquisition systems or other sensitive electronic equipment in locations where they can be effected by noise from nearby equipment (such as relays, drives or motors).

Provides surge diversion, isolation transformer and power line filter for complete power quality protection. Compatible with available AC power in virtually every country with a variety of plug and receptacle combinations.

Suitable for a variety of loads up to 10.4 amps.

These special medical power conditioners have an output with its neutral not bonded to ground. This feature is designed for applications requiring a "floating electrical ground."

Suitable for PC's, analyzers and other electronic equipment in hospitals and laboratories for loads up to 10.4 amps.

Provides networked systems with benefits beyond those of traditional international power conditioning products. Patented Powevar filter elements in the safety ground circuit prevent the formation of "ground loops" that are common in networked applications.

Provides surge diversion, isolation transformer and power line filter for complete power quality protection. GPI Series 1 can be programmed for any input voltage worldwide.

The low-impedance, three-phase transformer and bi-directional noise filter of the GPI Series 3 improve reliability and production yields. Large electronic systems are effectively protected from the problems caused by power disturbances.

Wherever in the world you ship electronic and computer equipment, the GPI Series B provides built-in power conditioning. These models accept any AC voltage input from 95 to 240 VAC, 50/60 Hz, and convert it to 120 VAC - so you don't need to work with several power supplies or other components for your equipment to work with a range of international voltages for loads up to 25 amps.

You can order Powervar power conditioners pre-assembled or order rack mount kits so you can retrofit in the field. Powervar's power protection can be installed in broadcast studios, telecom applications, LANs, laboratories and anywhere else that rack mounting is more convenient.

Power distribution is available from a number of equipment manufacturers due to a large availability of used and refurbished equipment. This flexibility allows for more options and configurations.

The WHR Series are high power units that can correct wide fluctuations in input voltage. These units are typically 99% efficient, have extremely low harmonic distortion, and are insensitive to the magnitude and power factor of load so they can be used with almost any load, even those with high inrush currents.