All batteries and are not created equal. Gruber manufactures batteries specifically for electronic equipment, and offers one of the longest shelf lives assuring your equipment long life and reliability.
Price:
$20.39
SKU:
58AGPS-12-12-F2
Specifications
Voltage
Amp/H
Length
Width
Height
Weight
12 Volts
12 AH
5.95"
3.86"
3.74"
9.68 lb
Specifications
Battery Type
12V, 12 Amp Hour
Capacity
20hour rate (600mA)
12Ah
10hour rate (1.12A)
11.2Ah
5hour rate (2.04A)
10.2Ah
1hour rate (7.54A)
7.54Ah
15min rate (24A)
6.0Ah
Dimensions
Length
151mm (5.95in)
Width
98mm (3.86in)
Height
95mm (3.74in)
Total Height
101mm (3.98in)
Approx Weight
9.68Lbs.(4.27kg)
Self Discharge
Current
Maximum Discharge Current for 30 seconds:
240A
Maximum Discharge Current for 5 seconds:
480A
Operating Temp
Range
Charge
0°c(32°f) to 40°c (104°f)
Discharge
-15°c(5°f) to 50°c (122°f)
Storage
-15°c(5°f) to 40°c (104°f)
Internal Resistance
(1KHz) 13 mΩ
Container Material
ABS
Terminal
F1 or F2
Compatible UPS Units - Battery Cross Reference
Brand
Model
Qty Per UPS
Conext
900 AVR
1
Deltec
PRA 1000
2 or 4
Deltec
PRC 1000
1 or 2
Deltec
PRM 700
1
Fenton
PowerPal L1000
2
Fenton
PowerPal L1000X
2
Fenton
PowerPal L1400
3
Fenton
PowerPal L1400X
3
NCR
4070-0700-7194S (700VA)
1
OptiUPS
1000ES
2
OptiUPS
1000PS
2
OptiUPS
1400E
2
OptiUPS
650E
1
OptiUPS
650ES
1
Parasystem
MBK 300
2
Parasystem
MPK 320
2
Parasystem
PRO 1000
2
Parasystem
PRO 2200R
4
Parasystem
PRO 700
1
Unisys
UP910
2
Features
Lead alloy with low calcium minimizes gassing and extends life of grid.
Through unique active material recipes, plates after undergoing curing and tank formation provide outstanding energy density and ensure the quality of the battery.
Using brass coated lead alloy battery terminals minimizes impedance of connecting cells inside.
Case made of ABS resin and cells kept under internal pressure protects from outer shock or impact.
Micro-porous AGM separator completely absorbs and retains electrolyte under the pressured cell design.
Electrolyte sufficiently serves for electrochemical reactions in battery but never spills.
Battery cases are sealed in epoxy and cells are covered with vents to avoid cell contamination with the atmosphere and serve for internal oxygen reaction.
With very little gas evolution, the water loss is minimized and service life is extended. Excess pressure and gas will be released which ensures safety.
